Denatured and industrial ethyl alcohol · Ultra Pure

The permit you hold decides what you are allowed to buy.

Specially denatured, completely denatured, tax-free and tax-paid ethyl alcohol at 190 and 200 proof — drum, tote, tanker, ISO and rail. Start with the authorisation, not the price, because the authorisation is what constrains the formula.

Request a quote → The formula index

Or call the desk: 203.662.9761

Which permit

Four ways to buy industrial alcohol, and they are not interchangeable

Nearly every wasted conversation in this category starts with a buyer asking for a price before establishing which of these they are entitled to receive.

RouteAuthorityWhat it requiresThe constraint
Specially denatured alcohol (SDA) 27 CFR Part 20 Industrial Alcohol User Permit You may only use the formulas authorised for your stated use, and the denaturant stays in your product.
Completely denatured alcohol (CDA) 27 CFR Part 21, Subpart C No user permit Five formulas only, and the denaturant load is heavy enough to rule CDA out of most finished-goods applications.
Tax-free alcohol 27 CFR Part 22 Permit, and a qualifying class of user It may not be used in any product for sale. See below — this is the one people misread.
Tax-paid alcohol — No permit No restriction on use. The federal excise tax is in the price, which for most industrial volumes makes it the expensive option.
The decision in one line

If the alcohol ends up in something you sell and it can tolerate a denaturant, you want SDA and the permit that goes with it. If it ends up in something you sell and it cannot tolerate a denaturant, you are buying tax-paid alcohol and the tax is the cost of that purity. Tax-free alcohol is not the cheap version of either.

Choosing a denaturant

The denaturant is a formulation decision

It is routinely treated as a paperwork choice made by whoever fills in the permit application. It is not. The denaturant does not come back out, so it is an ingredient in whatever you are making.

Three questions settle it, in this order:

  • What is the authorised use? Each formula carries a list of permitted uses. A formula authorised for coatings is not authorised for a hair product simply because the chemistry would work.
  • What can the finished product tolerate? Acetone, methanol, isopropanol, tert-butyl alcohol and essential oils all behave differently in a formula and on a label. Denatonium benzoate makes a product bitter — which is the point, and is also a problem if anything goes near a mouth.
  • What does your process allow? Formula 2-B, for example, must be used in a closed and continuous system unless a TTB officer authorises otherwise. That is a plant constraint, not a formulation one.

Specially denatured — SDA

Small denaturant loads, chosen to be compatible with a defined set of uses. Thirty-plus formulas.

Requires a permit, recordkeeping and use within the authorised scope.

This is what almost every manufacturer actually needs.

Completely denatured — CDA

Heavy denaturant loads designed to make the alcohol unrecoverable and undrinkable in any practical sense.

No permit required to use it, which is why it gets suggested — but Formula 35 carries 29.75 gallons of ethyl acetate per 100 gallons of alcohol, and Formula 20 is restricted to fuel use.

Suitable for solvent and fuel applications. Rarely suitable for anything that touches a consumer.

The mistake worth naming

Choosing a formula because it is the one the supplier has in stock. The denaturant is in your finished product permanently, it is subject to the authorised-use list, and changing it later means re-qualifying the formula and in some cases amending the permit. Settle it before the first order, not after the first production run.

Formula index

The formulas we supply, and what is actually in them

Quantities are per 100 gallons of ethyl alcohol, as published in 27 CFR Part 21. Over fifty approved formulas exist; these are the ones that move.

Specially denatured alcohol — Part 21, Subpart D

FormulaDenaturant per 100 galTypical authorised use
SDA 2-B½ gal rubber hydrocarbon solvent, toluene, heptane or hexanePlastics and photographic solvents, dehydration, chemical processing, ethyl ester and ether manufacture. Closed, continuous system required unless TTB authorises otherwise.
SDA 3-A5 gal cyclohexane or methyl alcoholThe broad workhorse — coatings, plastics, inks, cosmetics, disinfectants, cleaning products, processing, raw material and laboratory use.
SDA 3-C5 gal isopropyl alcoholSimilar scope to 3-A. Not permitted for making Reagent Alcohol under the general-use formula at § 20.117.
SDA 23-A8 gal acetone, USPCoatings, candy glazes, hair and skin products, pharmaceuticals, disinfectants, cleaning products, refrigerating fluids.
SDA 3010 gal methyl alcoholCoatings, plastics, photographic products, inks, soaps, disinfectants, cleaning, raw material, reagent use.
SDA 35-A4.25 gal ethyl acetate at 100% ester contentCandy glazes, inks, processing; raw material for vinegar, acetic acid, ethyl acetate and synthetic resins; animal feed supplements.
SDA 38-B10 lb of listed oils — menthol, eucalyptol, camphor, thymol, phenol and othersHair and skin products, perfumes, dentifrices, mouthwash, shampoos, external pharmaceuticals, antiseptics, sterilising solutions.
SDA 40-B1/16 oz denatonium benzoate, NF + ⅛ gal tert-butyl alcoholThe personal-care standard — inks, hair and skin products, perfumes, toilet waters, shampoos, soaps, external pharmaceuticals, disinfectants.

Completely denatured alcohol — Part 21, Subpart C

FormulaDenaturant per 100 galMinimum proof & notes
CDA 12-A5 gal toluene or 5 gal heptane185 proof minimum
CDA 182.50 gal methyl isobutyl ketone (or mixed nitropropane isomers / methyl n-butyl ketone) + 0.125 gal pyronate + 0.50 gal acetaldol + 1.00 gal kerosene or equivalent160 proof minimum
CDA 194.0 gal methyl isobutyl ketone or equivalent + 1.0 gal kerosene or equivalent160 proof minimum
CDA 202.0 gal of listed hydrocarbons, or 5.0 gal toluene195 proof minimum. Restricted to fuel use.
CDA 3529.75 gal ethyl acetate at 100% ester content185 proof minimum

Source: 27 CFR Part 21, Subparts C and D, current as of November 2026. Authorised-use lists are summarised, not reproduced in full — check the regulation for your specific application. Custom and organic denatured blends are available on request. [[CONFIRM — which formulas Ultra Pure holds in stock versus blends to order, and current organic denatured options.]]

Tax-free alcohol

Tax-free is not a discount

It is the most frequently misunderstood route in Part 22, and the misunderstanding is expensive because it is usually discovered at audit rather than at purchase.

Tax-free alcohol is undenatured, full-strength ethyl alcohol supplied without payment of the federal excise tax, to a restricted class of user: hospitals, laboratories, educational institutions and certain government bodies, each holding a permit under 27 CFR Part 22.

§ 22.102(b)

Tax-free alcohol may not be used in any product for sale. Not as an ingredient, not as a processing aid that remains, not in a sample given away as part of a commercial relationship.

If your alcohol ends up in a product that generates revenue, tax-free is not an available route no matter what kind of institution you are. A university laboratory may hold a tax-free permit and still be unable to use that alcohol in a product it licenses.

The lawful alternatives for a manufacturer are SDA where the product tolerates a denaturant, and tax-paid alcohol where it does not. Where a drawback applies — nonbeverage products made with tax-paid spirits — the mechanism is a claim under 27 CFR Part 17, not a tax-free purchase.

We can quote all three routes. Tell us the end use and we will tell you which ones are open to you.

Hazard communication

If you repackage or blend it, OSHA treats you as the manufacturer

This has already changed, it changes again next year, and it reclassifies a large number of companies who think of themselves as distributors.

  • OSHA’s updated Hazard Communication Standard aligned to GHS Revision 7 was published 20 May 2024.
  • The compliance date for substances was 19 May 2026 — that date has passed.
  • The compliance date for mixtures is 19 November 2027.
  • Under OSHA directive CPL 02-02-079, effective 19 May 2026, an operation that repackages or blends a chemical is a chemical manufacturer — not a distributor. That brings the full authoring obligation for safety data sheets and labels with it.
What this means for a buyer of bulk ethanol

Drumming down a tanker into totes, or blending alcohol with anything before it leaves your site, puts the SDS and label authoring obligation on you for the resulting product. Passing along the supplier’s safety data sheet is not compliance, because it is not a sheet for your product.

We supply current safety data sheets for what we ship you. What you issue for what you make is yours to author, and if it is a mixture the November 2027 date is the one to plan against.

The range

Grades, proofs and where the line sits

Industrial

190 and 200 proof

Undenatured and denatured, in every formula in the index above. Food-grade and FCC options where the application requires it.

Corn, cane and wheat feedstocks; organic and Non-GMO Project Verified options on cane.

Extraction

Botanical and nutraceutical

Food-grade ethanol at tanker and ISO scale for essential oil, resin and botanical extraction.

The grade and the tax route are separate questions here, and the second one usually decides the first.

Pharmacopeial

USP and EP — elsewhere

Alcohol USP and Dehydrated Alcohol USP are monograph products with per-lot testing obligations that sit outside this page.

Those are covered in full at uspalcohol.com.

Formats and what rides with a load

  • Drums and totes from stock; road tanker, ISO and rail scheduled.
  • UN1170, Class 3 flammable liquid, Packing Group II — placarded all four sides.
  • Certificate of analysis, lot-referenced, with both specification limit and typical columns.
  • Current safety data sheet for the product as shipped.
  • Permit verification before the first SDA or tax-free shipment. We will ask for it; a supplier that does not is a supplier with a recordkeeping problem.

[[CONFIRM — current terminal and warehouse list, which formulas ship from stock, and FCC/food-grade scope by feedstock.]]

Common questions

What industrial buyers ask us first

We do not have a permit. What can we buy today?

Completely denatured alcohol and tax-paid alcohol, both without a user permit. If neither fits the application, the answer is an Industrial Alcohol User Permit under 27 CFR Part 20 and specially denatured alcohol. We can tell you which formula your use falls under before you apply, which is the part that usually holds the application up.

Which SDA formula should we be using?

It depends on the authorised use list and on what your finished product tolerates, in that order. For personal care, 40-B is the common answer. For general solvent and coatings work, 3-A. For anything near a mouth, 38-B is usually the starting point. Tell us the application and we will point you at the formulas that cover it — but your permit scope is yours to confirm.

Is tax-free alcohol cheaper?

It carries no federal excise tax, but it may not be used in any product for sale under § 22.102(b), and it is restricted to a defined class of permitted users. For a manufacturer it is almost never the right route. The comparison that matters is SDA against tax-paid.

Can we use CDA instead of getting a permit?

Sometimes, for solvent, cleaning and fuel applications. There are five CDA formulas, the denaturant loads are high — Formula 35 is nearly 30% ethyl acetate by volume — and Formula 20 is restricted to fuel use. If the alcohol touches a consumer product, CDA is usually the wrong tool.

Do we have to write our own safety data sheet?

If you repackage or blend, yes. Under OSHA directive CPL 02-02-079 that makes you a chemical manufacturer rather than a distributor, with the authoring obligation that follows. The mixtures compliance date is 19 November 2027.

What about USP-grade alcohol?

Different product, different obligations — Alcohol USP and Dehydrated Alcohol USP are monograph grades with per-lot incoming testing requirements. That is covered at uspalcohol.com rather than here.

Tell us the end use. We’ll tell you which routes are open.

Give us the application, the permit you hold or can obtain, the volume and the format. You will get the formulas your use is authorised for, pricing across the tax routes available to you, a lot-referenced certificate of analysis and a current safety data sheet.

Ultra Pure, LLC · 50 Old Kings Highway North, Darien, CT 06820
Desk: 203.662.9761

Request a quote

We reply within one business day.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*
What the alcohol goes into, or what it is used for.
Permit held*
This decides which tax routes we can quote you.
Route of interest
Will you repackage or blend before sale?